The SpyderX lens and human eye

 

How it Was

 

Previous Spyder models have utilized a contact design, where the optical system was in direct contact with the screen. Light was columnated by a baffle, evened out with a diffusor, then redirected to a large series of filtered sensors for measuring. This system was optimized over the years by adding a larger aperture, more stable filters, and other improvements; but the overall concept remained similar.

 

The honeycomb structure of the Spyder5 sensor minimized the influence of scattered light. Disadvantage: The Spyder5 had to lie flat on the display surface and thus required accurate handling.

 

What’s New

 

SpyderX is a complete break with that past. It uses newer, more sensitive sensors, a different color sensing method, but most importantly, it is lens-based. A large optical lens is mounted a distance back from the surface, surrounded by a stepped lens ring to reduce stray light at steep angles. The result looks much like a camera lens.

 

 

The Advantages

 

There are a number of advantages to this lens-based solution. The first is that it allows much more light to enter the optical engine, allowing more accurate measurements, especially at low light levels. And by being non-contact, SpyderX is much less sensitive to being in direct contact to the screen and at an exact angle, so perfect placement of the device is less critical. But the most interesting advantage to this new system is in its relationship to the human eye.

 

The Big Advantage

 

Device measurements are useful, but they tend to diverge from human vision, and result in mismatches to how the eye sees. This means that a device that functions more similarly to the human eye will produce less variation from what the eye sees. The result is that calibrating side-by-side displays of different types with SpyderX produces a better visual match than with previous Spyders, reducing or eliminating the need for visual tuning.

 

The Projector Advantage

 

The other place where SpyderX stands out is in projector calibration. Using SpyderX Elite to calibrate side-by-side projectors offers improved results, since the lens-based system is superior for viewing the light reflected from projection screens, compared to earlier designs, which were best off in direct contact; something that is not possible with a projection screen.

 

 

 
 

About the Author – C. David Tobie

 

C. DAVID TOBIE has been involved in color management and digital imaging from their early days, developing affordable color solutions, and teaching users how best to utilize them. Photographers know him for his writing and tech editing of textbooks and periodicals including Mastering Digital Printing, and Professional Photographer magazine, and his seminars on color and imaging at photo expos and workshops around the globe.

 

More articles from C. DAVID TOBIE